Archive for the ‘incra’ Category

Posted on: September 13th, 2020 by
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
We do not accept P. BOXES – PLEASE PROVIDE A PHYSICAL ADDRESS. We advise you to use a reputable carrier service when returning your goods. Please check the Voltage information and make sure it matches the one in your country. In case it’s not stated in the description, do ask us. We guarantee that your issue will be solved quickly. We usually respond within 24 hours on weekdays. Capitalizing On A Great Idea, The Folks At Incra Have Combined Their Highly Successful Miter 3000 With The Exclusive Angle lock Indexing System With A Sled System For The Table Saw. The Sled With T-Track And Clamping Fixture Secures The Work piece As One Solid Unit For Precision Cross-Cutting At Any Angle. The Right-Hand Portion Of The Sled, Once Cut, Secures To The Right Miter Slot Of Your Table Saw By Means Of A Miter Slider And Functions As A Zero Clearance Cut-Off Table That’s Perfectly Aligned With The Main Sled. Since This System Includes Precision Angle Adjustment, Stop Positioner And Clamping Sled For Superior Work piece Control, All Possibility For Cutting Error Has Been Eliminated And Each Cut Is Predictable And Precise. Finally, A Perfect Cross-Cutting System For Your Table Saw. Specifications: , Angle Lock:364 Angle Stops , Indexed Stops: Every 1/2 Degree Over + Or – 90 Degree Range , Special Stops:22-1/2 Degrees & 67-1/2 Degrees , Miter Head: Standard Plus Micro Plate , Glide lock Miter Bar: Width Is Adjustable In 10 Places , 36″-64″ telescoping Incra-Lock Flip Stop Fence, Incra; Incremental “Flip” Shop stop Positioner Order The Replacement Panel (H3602) For Maintaining Zero Clearance For Different Blades And Compound Angle Cutting. The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cut-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-inch length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. Capitalizing on a great idea, the folks a incra have combined their highly successful Miter3000 with the exclusive AngleLOCK Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw. Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000 specifications. Capitalizing on a great idea, the folks at Incra – The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle – The right-hand portion of the sled, once cut – Table saw that blends incremental angle control and a special 3-panel sled – Precision angle indexing teeth are laser cut in solid steel – 364 lock solid angle stops in 1/2-degree increments – Ten expansion disks adjust both sides of the bar for zero side play – Hold down clamp locks your work piece onto the sled. Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. The item “Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence” is in sale since Wednesday, April 1, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “vivian-store” and is located in US. This item can be shipped to United States.
  • UPC: 692623084040
  • EAN: 0692623084040
  • Brand: INCRA
  • MPN: MITER5000
  • Binding: Tools & Home Improvement
  • Publisher: Incra
  • ProductGroup: Home Improvement
  • PartNumber: MITER5000
  • Model: MITER5000
  • Manufacturer: Incra
  • Label: Incra
  • ISBN: Not Applicable

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Posted on: August 22nd, 2020 by
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Fence (NIB)

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Fence (NIB)
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Condition is new in sealed factory carton. The item “Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Fence (NIB)” is in sale since Wednesday, August 19, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “philiprst” and is located in Ellicott City, Maryland. This item can be shipped to United States.
  • Item Package Quantity: 1
  • MPN: Does not apply
  • Number of Items in Set: 1
  • Battery Included: No
  • Batteries Required?: No
  • Material: N/A
  • ISBN: Does not apply
  • Part Number: MITER5000
  • UPC: 313100227261
  • Product Dimensions: 37.8 x 25.9 x 3.7 inches
  • Model: Does not apply
  • Manufacturer: Does not apply
  • Item Weight: 31 pounds
  • Brand: Incra
  • Shipping Weight: 31 pounds
  • Color: Does not apply
  • EAN: 07445039682644
  • Item model number: MITER5000
  • Batteries Included?: No
  • Type: Miter Sled

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Fence (NIB)
Posted on: August 11th, 2020 by
Incra Miter 1000SE with Telescoping Fence
Incra Miter 1000SE with Telescoping Fence
Incra Miter 1000SE with Telescoping Fence
Incra Miter 1000SE with Telescoping Fence

Incra Miter 1000SE with Telescoping Fence
Achieve mitering accuracy that you never thought possible! Special Edition miter gauge comes with sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table. Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5° increments over a full 180° range, with special stops at 22-1/2° and 67-1/2°. Stainless steel vernier cursor delivers an incredible 1/10° resolution between fixed steps. Get perfect, repeatable accuracy every time – whether making basic 90° cut-offs, simple picture frames, complex compound miters, or a 20-sided object. Incra precision allows you to produce perfect, gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups. Sturdy Special Edition Incra-Lock fence telescopes from 18″ to a full 31″ length. Flip Shop Stop has patented saw tooth rack system that instantly controls the length of your cut. Dual flip arms, equipped with three sliding stop rods, operate independently or in tandem for one, two or three simultaneious stop positioner setups. Made of solid aluminum with hardened anodized surface. Miter bar has six expansion disks to adjust both sides of the bar for zero side play and anti-friction travel on all table saws and router tables with standard 3/8″ x 3/4″ miter slots. Interlocking tongue-and-groove cooperation between the flip arms and surface of the fence insures that the sharp end of a mitered board won’t wedge itself between the fence and the stop. The item “Incra Miter 1000SE with Telescoping Fence” is in sale since Saturday, August 8, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “jbirdhead” and is located in Ayden, North Carolina. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Type: Table Saw
  • Brand: Incra

Incra Miter 1000SE with Telescoping Fence
Posted on: July 22nd, 2020 by
Incra Miter Combo Value Pack

Incra Miter Combo Value Pack
NEW, Incra Miter Combo Value Pack, 147374, Dock & Lock the included INCRA Miter Gauge in Seconds, Removable t-slot retaining clips & adjustable miter bar, GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO sid, Special Edition Telescoping INCRA-LOCK Fence, This value-priced combo includes the Miter 1000SE gauge and the Incra Miter Express. Enjoy unmatched miter gauge precision combined with a sliding table with workpiece support on both sides of the blade. The Miter 1000SE lets you achieve mitering accuracy you never thought possible. 41 angle stops in 5° increments over a full 180° range. Miter bar adjusts to any standard 3/4″ x 3/8″ slot. Stainless steel primary scale. Incremental fence with patented rack. NEW Incra Miter Combo Value Pack – 147374 by Incra This value-priced combo includes the Miter 1000SE gauge and the Incra Miter Express. Incremental fence with patented rack positioning control telescopes from 18″ to 31″. Dual-arm flip shop stop. The Miter Express is the safest and most accurate crosscutting and mitering platform available, providing smooth-sliding zero-clearance cuts. Features two embedded T-Slot channels to secure the included hold-down clamp and outboard fence support. Superb crosscut and mitering control. Doubles any miter gauges crosscut range up to 24. Safely handles extra large and small workpieces. Eliminates all side play between table saws miter slot and any miter gauge. Eliminates all drag between workpiece and table saw, especially for extra large workpieces. Dock & Lock the included INCRA Miter Gauge in Seconds. Removable t-slot retaining clips & adjustable miter bar. GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO sid. Special Edition Telescoping INCRA-LOCK Fence. Special Edition 1/10th° Vernier Cursor UPC: 751922200527 PA34-05 incra, miter, sled, gauge, table saw. The item “Incra Miter Combo Value Pack” is in sale since Sunday, March 31, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Miter Saws”. The seller is “woodcraft_supply” and is located in Vienna, West Virginia. This item can be shipped to United States.
  • Brand: Incra
  • Voltage: 0
  • MPN: ME/1000SEWC
  • California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on Proposition 65: https://oehha.ca.gov/proposition-65

Incra Miter Combo Value Pack
Posted on: July 8th, 2020 by
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Capitalizing on a great idea, the folks at Incra. The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Precision angle indexing teeth are laser cut in solid steel. 364 lock solid angle stops in 1/2-degree increments. Ten expansion disks adjust both sides of the bar for zero side play. Hold down clamp locks your work piece onto the sled. The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. This item ships worldwide! International customers: please be aware that all of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence” is in sale since Monday, May 27, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “fastshipdirect” and is located in US. This item can be shipped to United States.
  • Color: Does not apply
  • Manufacturer: Does not apply
  • Model: Does not apply
  • Brand: Does not apply
  • UPC: 313100227261
  • ISBN: Does not apply
  • EAN: 07445039682644
  • MPN: Does not apply
  • Item model number: MITER5000
  • Batteries Included?: No
  • Batteries Required?: No
  • Product Dimensions: 37.8 x 25.9 x 3.7 inches
  • Material: N/A
  • Item Package Quantity: 1
  • Item Weight: 31 pounds
  • Part Number: MITER5000
  • Shipping Weight: 31 pounds

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
Posted on: June 23rd, 2020 by
Incra Miter Express / 1000se Miter Gauge Metric Combo

Incra Miter Express / 1000se Miter Gauge Metric Combo
The 3 locking screws in the mounting dock on top of the Miter Express make it possible to “Dock & Lock” any miter gauge in seconds, converting it to the safest and most accurate cross-cut or mitering sled available. The patented guide bar on the bottom of the dock eliminates all play in the miter slot. Even if you have an economy gauge it will work just as well as a high priced model because rides in the sled dock, not your saw’s miter slot. Need your miter gauge at another tool? Unlocking the gauge is just as fast. Miter Express handles stock up to 24 wide. System includes an Incra hold down clamp to hold small pieces safely for cutting. Includes both the #67106 Miter Express and the #1288094 1000SE Miter Gauge Metric. The item “INCRA MITER EXPRESS / 1000SE MITER GAUGE METRIC COMBO” is in sale since Tuesday, January 21, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Measuring Tapes & Rulers”. The seller is “hartvillehardware” and is located in Hartville, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bolivia, Ecuador, Egypt, Guadeloupe, Iceland, Jordan, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Aruba, Bangladesh, Brunei darussalam, French guiana, Guernsey, Gibraltar, Jersey, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.
  • MPN: M-ME/1000SE
  • Brand: TAYLOR DESIGN GROUP INC
  • California Prop 65 Warning: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov WARNING: Some dust created by power sawing, sanding, grinding drilling or other machining contains chemicals such as lead from lead-based paints, wood dust, crystalline silica from bricks and cement and other masonry products or aresenic and chromium from chemically treated lumber which are known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid inhaling dusts or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov

Incra Miter Express / 1000se Miter Gauge Metric Combo
Posted on: April 7th, 2020 by
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws

INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws. Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18 track fence and sliding stop positioner. Whether it’s your basic 90 cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable accuracy every time. Technical Details:Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive range. Plus 1/2 vernier cursor. Special stops at 22-1/2 and 67-1/2. GlideLOCK Miter Bar with six expansion points allows you to adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard (or near standard) miter gauge channels. This means the bar won’t wiggle around in the miter slot! With 18 Incra track fence and Incra sliding stop positioner. Accurate enough to produce gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups. Check out my other items. The item “INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws” is in sale since Wednesday, September 25, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “tall-corn” and is located in Decorah, Iowa. This item can be shipped worldwide.
  • California Prop 65 Warning: WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
  • Type: Table Saw Accessories
  • UPC: 751922200107
  • Brand: INCRA
  • MPN: MITER1000/18T
  • Manufacturer: INCRA
  • Product Type: Table Saw Accessories

INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws
Posted on: January 1st, 2020 by
INCRA Miter1000/HD Miter Gauge

INCRA Miter1000/HD Miter Gauge
The HD stands for High Definition, because the gauge’s exclusive AngleLOCK Indexing System has a whopping 180 can’t-miss angle stops in 1° increments with special stops located at 22-1/2 degrees. Add the industry’s smoothest adjustable miter bar, a telescoping IncraLOCK Cut-off Fence & Flip Shop Stop, and a stainless steel vernier scale that reads to 1/10°, and you’ve got a winner that will improve the quality of any project. Six GlideLOCK expansion disks adjust both sides of the miter bar for ZERO side play, low-friction travel. The bar fits standard square-sided miter slots measuring 3/4″ wide x 3/8″ deep, with or without a 15/16 T-slot at the bottom. The miter bar’s adjustment range accommodates actual slot widths between 0.740″ and 0.765″. The telescoping IncraLOCK Miter Fence telescopes from 18″ to a full 31″ length and features a front T-slot for adding a wooden zero-clearance sub fence. The Flip Shop Stop is equipped with INCRA’s patented incremental positioning racks for incredible cut-length accuracy and 100% day repeatability. The item “INCRA Miter1000/HD Miter Gauge” is in sale since Tuesday, April 23, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “hartvillehardware” and is located in Hartville, Ohio. This item can be shipped to United States.
  • MPN: MITER 1000/HD
  • Brand: TAYLOR DESIGN GROUP INC
  • California Prop 65 Warning: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov WARNING: Some dust created by power sawing, sanding, grinding drilling or other machining contains chemicals such as lead from lead-based paints, wood dust, crystalline silica from bricks and cement and other masonry products or aresenic and chromium from chemically treated lumber which are known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid inhaling dusts or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov

INCRA Miter1000/HD Miter Gauge
Posted on: December 27th, 2019 by
Incra Miter 3000se Miter Gauge

Incra Miter 3000se Miter Gauge
This tricked out version of Incra’s famous Miter Gauges adds bonus features not found on the originals. The 3000SE has an 27″ fence that telescopes to 49″; 364 indexed stops in 5, 1, or 1/2 degree increments over a full 180 degree range; Incra’s incredibly versatile Dual Flip Shop Stop; and a 1/10th degree vernier cursor. It also offers continuous adjustment between settings. Interlocking grooves in the fence and the Flip Stop ensure that the sharp edge of mitered work will not push behind the stop. The GlideLock Miter bar on the gauge gives a slop-free fit in the miter gauge slot. The item “INCRA MITER 3000SE MITER GAUGE” is in sale since Wednesday, July 24, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “hartvillehardware” and is located in Hartville, Ohio. This item can be shipped to United States.
  • MPN: MITER3000/SE
  • Brand: TAYLOR DESIGN GROUP INC
  • California Prop 65 Warning: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov WARNING: Some dust created by power sawing, sanding, grinding drilling or other machining contains chemicals such as lead from lead-based paints, wood dust, crystalline silica from bricks and cement and other masonry products or aresenic and chromium from chemically treated lumber which are known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid inhaling dusts or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov

Incra Miter 3000se Miter Gauge
Posted on: December 2nd, 2019 by
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge

Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Product description Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18 track fence and sliding stop positioner. Whether it’s your basic 90° cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable accuracy every time. Features: Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive ° range Plus 1/2 ° vernier cursor Special stops at 22-1/2 ° and 67-1/2 ° GlideLOCK Miter Bar with six expansion points allows you to adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard (or near standard) miter gauge channels. Combining a solid-steel laser cut protracter head with a gold anodized Incra Track Fence, and a red Stop Positioner the sliding scales fit perfectly in the top slot on the fence to make stop positioning easy, fast and accurate. Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5-degree increments over a full plus or minus 90-degree range. Other features include a standard miter head, a GlideLOCK miter bar with width that is adjustable in 6 places, an 18-inch track fence, and a sliding stop positioner. The Miter Gauge also has six expansion points that allow for adjustments to both sides of the bar for ZERO side play, and anti-friction travel. Working with all table saws with standard (or near standard) 3/4-by-3/8-inch miter gauge channels, including Delta, Craftsman, and imports. Whether it’s your basic 90-degree cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter 1000 delivers perfect repeatable accuracy every time. Table saw that delivers perfect miter cuts the first time. Solid-steel laser cut protracter head and gold anodized Track Fence. 1 angle stop with indexed stops every 5-degrees. Precision angle indexing teeth. 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play. The item “Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge” is in sale since Sunday, February 24, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “yellowhammertoolworks” and is located in US. This item can be shipped to United States.
  • Power Source: Manual
  • Brand: Incra
  • MPN: MITER1000/18T

Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge